Frame 53

  1. Barbette: 122 mm NVNC on 299 mm VC
  2. Forecastle Deck: 2 x 13 mm HT plates
  3. Outer Shell: 19 mm HT plate
  4. Upper Deck: 2 x 13 mm HT plates
  5. Upper Belt: 224 mm VC on 25 mm HT plate
  6. Lower Barbette: 209 mm VC + 75 mm VNC
  7. Main Deck: 3 x 25 mm HT Plates
  8. Main Belt: 299 mm VC on 17.5 mm HT plate
  9. Lower belt: 149 mm tapering to 75 mm VC on 17 .5 mm HT plate
  10. Upper slope: 274 mm VC tapering to 125 mm VC on 3 x 25 mm HT plates
  11. Bottom of slope: 242 mm NVNC on 3 x 25 mm HT plates
  12. Barbette Floor: 2 x 25 mm HT plates
  13. Armor shelf: 19 mm + 25 mm + 22 mm HT plates
  14. Top Torpedo Bulkhead: 44 mm CNC on 4 x 25 mm HT plates
  15. Middle section Torpedo Bulk head: 107 mm increasing to 220 mm VH on 3 x 25 mm HT plates
  16. Lower section torpedo bulkhead: 3 x 25 mm HT plates
  17. Bottom section Torpedo Bulkhead: 2 x 25 mm HT plates
  18. Keel: 25 mm HT + 13 mm HT plates
  19. Magazine: 3 7.5 MM CNC
  20. Interior Bulkhead of Barbette: 13 mm HT

Frame 77

  1. Barbette: 122 mm NVNC on 299 mm VC
  2. Forecastle Deck: 2 x 13 mm HT plates
  3. Outer shell: 19 mm HT
  4. Upper Deck: 2 x 13 mm HT plates
  5. Upper Belt: 224 mm VC on 25 mm HT plate
  6. Main Belt: 299 mm VC on 17.5 mm HT plate
  7. Lower Belt: 149 mm tapers to 75 mm VC on 17.5 mm HT plate
  8. Main Deck: 3 x 25 mm HT plates
  9. Middle Deck: 125 mm NVNC on 2 x 25 mm HT plates
  10. Lower Barbette: 209 mm VC on 75 mm VNC plate
  11. Inboard Middle Deck: 2 x 25 mm HT plates
  12. Upper Slope: 274 mm VC tapering to 125 mm on 3 x 25 mm HT plates
  13. Lower Slope: 242 mm NVNC on 3 x 25 mm HT plates
  14. Armor Shelf: 19 mm + 25 mm + 22 mm HT plates
  15. Upper Torpedo Bulkhead: 44 mm CNC on 4 x 25 mm HT plates
  16. Middle Torpedo Bulkhead: 107 mm increasing to 220 mm VH on 3 x 25 mm HT plates
  17. Lower Torpedo Bulkhead: 3 x 25 mm HT plates
  18. Bottom Torpedo Bulkhead: 2 x 25 mm HT plates
  19. Keel: 25 mm HT on 13 mm Ht plate
  20. Magazine Protection: 38 mm CNC Plate

Frame 143

  1. Forecastle Deck: 2 x 13 mm HT plates
  2. Outer Shell: 19 mm HT plate
  3. Interior Bulkhead 25 mm HT plate
  4. Upper Deck: 2 x 25 mm + 19 mm HT plate
  5. Upper Belt: 224 mm VC on 25 mm HT plate
  6. Crush Tubes: 60: 225 mm x 2 mm tubes
  7. Main Belt: 299 mm VC on 17,5 mm HT plate
  8. Lower Belt: 149 mm tapering to 75 mm VC on 17.5 mm HT plate
  9. Armor Shelf: 19 mm + 25 mm + 22 mm HT plates
  10. Slope: 3 x 25 mm HT plates
  11. Top of slope: 2 x 25 mm HT plates
  12. Main Deck: 25 mm HT plate
  13. Interior Bulkhead: 2 x 25 mm + 19 mm HT plates
  14. Torpedo bulkhead: 3 x 25 mm HT plates
  15. Bottom Torpedo Bulkhead: 2 x 25 mm HT plates
  16. Keel: 25 mm + 13 mm HT plates
  17. Boiler Room internal bulkheads 9 mm HT plate

Frame 201

  1. Forecastle Deck: 2 x 13 mm HT plates
  2. Outer Shell: 19 mm HT Plate
  3. Upper Deck: 2 x 25 mm HT + 19 mm HT plate
  4. Upper Belt: 224 mm VC on 25 mm HT plate
  5. 45: 225 mm x 2 mm Crush Tubes
  6. Main Belt: 299 mm VC on 17.5 mm HT plate
  7. Lower Belt: 149 mm tapering to 75 mm VC on 17.5 mm HT plate
  8. Slope: 3 x 25 mm HT plates
  9. Main deck 6 mm HT plate
  10. Inboard Bulkhead: 2 x 25 mm + 19 mm HT plates
  11. Middle Deck: 2 x 25 mm HT plates
  12. Armor Shelf: 19 mm + 25 mm + 22 mm HT plates
  13. Torpedo Bulkhead: 3 x 25 mm HT plates
  14. Bottom of Torpedo bulkhead: 2 x 25 mm HT plates
  15. Keel: 25 mm + 13 mm HT plates
  16. Engine Room Bulkheads 9 mm HT plate
  17. Bulge shell: 8 to 12 mm HT plates

Frame 239

  1. Barbette: 122 mm NVNC on 299 mm VC
  2. Forecastle Deck: 2 x 13 mm HT plates
  3. Outer Shell: 19 mm H T plate
  4. Lower Barbette: 209 mm NVNC on 75 mm VNC
  5. Upper Deck: 2 x 25 mm HT + 19 mm HT plate
  6. Main Deck: 2 x 13 mm HT plates
  7. Middle Deck: 125 mm NVNC on 2 x 25 mm HT plates
  8. Upper Belt: 224 mm VC on 25 mm HT plate
  9. Main Belt: 299 mm VC on 17.5 mm HT plate
  10. Lower belt: 149 mm tapering to 75 mm VC on 17.5 mm HT plate
  11. Armor shelf: 19 mm + 25 mm + 22 mm HT plates
  12. Upper Slope: 3 x 25 mm HT plates
  13. Bottom Inboard Barbette Protection: 274 mm tapering to 199 mm VC
  14. Top Inboard Barbette Protection: 249 mm tapering to 149 mm VC
  15. Torpedo Bulkhead: 3 x 25 mm HT plates
  16. Bottom Torpedo bulkhead: 2 x 25 mm HT plates
  17. Keel: 25 mm + 13 mm HT plates
  18. Bottom of Barbette: 37.5 mm CNC
  19. Inboard Shaft: 25 mm HT plate
  20. Magazine: 25 mm + 13 mm HT plates

Frame 261

  1. Barbette: 122 mm NVNC on 299 mm VC
  2. Upper Deck: 2 x 13 mm HT plates
  3. Outer Shell: 19 mm HT plate
  4. Upper Belt: 224 mm VC on 25 mm HT plate
  5. Lower Barbette: 209 mm VC on 75 mm VNC F
  6. Main Deck: 2 x 25 mm HT on 19 mm HT plate
  7. Main Belt: 299 mm VC on 17.5 mm HT plate
  8. Lower Belt: 149 mm tapering to 75 mm VC on 17.5 mm HT plate
  9. Armor Shelf: 19 mm +25 mm + 22 mm HT Plates
  10. Slope: 3 x 25 mm HT plates
  11. Middle Deck: 125 mm NVNC on 2 x 25 mm HT plates
  12. Inboard Lower Belt: 125 mm increasing to 249 mm VC
  13. Upper Torpedo Bulkhead: 3 x 25 mm HT plates
  14. Middle Torpedo Bulkhead: 25 mm VH increasing to 199 mm VH on 3 x 25 mm HT plates
  15. Bottom Torpedo Bulkhead: 2 x 25 mm HT plates P
  16. Keel: 25 mm + 13 mm HT plates
  17. Magazine: 37.5 mm CNC
  18. Shell Rooms: 25 mm + 13 mm HT plates

Credits

This article is copyrighted 2013-2017 by Robert Lundgren and is reproduced on NavWeaps.com with permission.

The article was transcribed for the internet by Tony DiGiulian.